Anshan Jiehv Broadcasting Electronic Technology Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Huang Yi
  • Company Name : Anshan Jiehv Broadcasting Electronic Technology Co., Ltd.
  • Tel : 86-135-41269116
  • Fax : 86-28-83116698
  • Address : Liaoning,Anshan,No.9 of Yong Ning Street, High-Tech industry development district(western area)
  • Country/Region : China

3kw UHF/VHF TV transmitter

3kw UHF/VHF TV transmitter
Product Detailed
Modularization design Touch screen control High Quality with excellent performance Top grade service after sales

3KW UHF Television Transmitter Configuration List

 Component Title

 Configuration  Quantity

 Specification Model

 Exciter

 2 set

 The exciter is advanced JHV-04 exciter

 End Power  Amplifying  Module

 4 sets

 Each Groups Peak Value Power 900W

 Switch Power

 3 set

 32V/2500W

 Main  Controlling  System

 1 set

 Computer Monitoring System and  Monitoring Software

 Cooling system

 1 set

 DF Model Centrifugal Air Blower

 Machine cabinet

 1 sets

 1997mm (Height) ×565mm (Width) ×1100mm  (Depth)

 The backup redundant design of main parts of transmitter, and eliminate single point of failure, and it can achieve the zero shutdown rate of single machine.  Use hot-swap technology, it can be replaced with the amplifier module or power supply without power off, it is easy to repair and maintenance, MTTR short.  The exciter is advanced JHV-04 exciter, with multiple pre-correction functions such as DG and DP, as well carries out carrier frequency precise bias.  The module has self-diagnosing functions, to display and read various technical parameters on LCD (Liquid Crystal Display).  Switch constant voltage power with parallel share current, high reliability.  Use GYSEL synthesizer, this synthetic technique can bear great power, and high reliability.  Intelligent control system, the transmitter has computer interface, and can be connected with the remote computer, the computer monitoring software can make use of the management and monitoring of computers to realize the intelligent and network.  The sound protective system, guarantee the high reliability, multiple protection (Over-voltage, over-current, over heating, the standing wave ration, lightning prevention etc.) measures, and to protect long MTBF.  The cooling system adopts the forced air-cooled, in-house low noise centrifugal fan. Effectively lower the temperature of amplifier module, enhance the reliability of the whole machine, and reduce the whole machines noise. 

TV Standard : PALD or conform to the requirements

Frequency Scope: 48.5-223MHz/470-870MHz

Rated Output Power: 3KW (Peak Sync)

Image Modulation Degree:  ≤87.5%

The difference of Sound Carrier Frequency and Vision Carrier Frequency: 6.5±0.001MHz

Vision Carrier Frequency Stabilization: 300Hz/month

Radio Frequency Output: 1-5/8 or L27

Vision/sound Power Ration: 10:1

Nominal Load Impedance:50Ω (Same Axis)

Power Consumption: 6KVA

Dimension:1997mm (Height) ×565mm (Width) ×1100mm (Depth)

2.2 Image Perform

Video Input Level: 1Vp-p normal polarity (Synchronizing Pulse 0.3 V)

Video Input Impedance: 75Ω (Same Axis)

Frequency Stabilization: superior ±300Hz/month

Light-intensity nonlinear: ≤10%

Amplitude Frequency Characteristics

Relative to Vision Carrier Frequency: See table 1

Group delay-frequency characteristics

The largest limited scope is ±50ns; when comes to 4.43MHz, it is ±30ns

Differential Gain Distortion:  ≤5%

Differential phase distortion:  ±40

Second-harmonic output:  ≤-60dB

Periodic clutter Signal-to-clutter ratio:  (≤1KHz):≥50dB

Continuous random wave signal-to-noise ratio (10KHz6MHz):  :≥50dB

Luminance/brightness gain inequality:  ≤5%

Luminance/brightness delay inequality: ±30ns

Field frequency square wave: ≤2%

Linear frequency square wave:≤2%

2T Pulse: ≤2%

2.3 Sound Performance

Frequency Stabilization: superior to ±300Hz/month

Frequency Offset: ±50KHz (100% modulation)

Video Input Level: 0±6dBm

Video Input Impedance: 600Ω (balance)

Amplitude-frequency response: ≤±1dB(30Hz15KHz)

Pre-emphasis time constant: 50μs

Frequency Modulation Noise: ≤-60dB

Harmonic Distortion(Frequency Offset 50KHz): ≤1%(30Hz15KHz)

Cross Modulation Distortion: ≤10%

2.4 Environment Condition

Temperature: 0+35

Relative Humidity: ≤95%(25)

Atmospheric Pressure: 86106KPa

Power Supply: 3´380VAC(±15%), Frequency: 50Hz±2Hz

Temperature: 0+35

Relative Humidity: ≤95%(25)

Atmospheric Pressure: 86106KPa

Power Supply: 3´380VAC±15%, Frequency50Hz±2Hz

 table 1

f(MHz)

-4.43

-1.25

-0.75

-0.5

0

+1.5

+3

+4.43

+6

≥+6.5

Upperlimit(dB)

-30

-20

+0.5

+0.5

+0.5

0

+0.5

+0.5

+0.5

-20

Lowerlimit(dB)

-∞

-∞

-4

-1.5

-1.5

0

-1

-1

-4

-∞

3kw UHF/VHF TV transmitter



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.